Hi Friends!! I can finally say it, Happy Fall!! It’s official, woo hoo! So, being it’s the first day of Fall, I wanted to share with you some fall Cricut projects and give you some free SVG cut files!
Disclosure: This post contains affiliate links. See Policies tab.
Last year I made this wood sign and had a Christmas burlap sign on it. I have meant to make a different burlap sign for each season, but somehow I never got around to it… Wonder how that happens!
Well, I have finally made a new one! Fall is my second favorite time of year (after Christmas), so I thought it would be only fitting to at least get this one done!
Let’s get started!
Materials Need for Fall Cricut Projects
Disclosure: This post contains affiliate links from Amazon, Expressions Vinyl and/or Cricut.com. I receive a small commission at no cost to you when you make a purchase using my links.
- fence board background – Click here to see my step by step tutorial on how to make one
- burlap – You can find it on Amazon here or at Joanns for pretty cheap
- HTV or iron-on vinyl – Expressions Vinyl is another great place to get Siser Easyweed
- Cricut cutting machine
- Heat Press or Iron
Make sure to check out my tutorial on how to make the wood frame out of old fence boards for pretty much free. Link above under materials!
For my sign, I cut out a piece of burlap that was 15″ x 18″, which left 1/2 inch to fray. It’s better to cut too much! You can always trim off the extra. Watch the video at the top or side to see how to easily cut burlap.Then you are going to cut out the file on heat transfer vinyl / iron on vinyl. I used brown for all the words and added some color with the images, but you can use whatever colors you want. You can make all the words different colors for extra fun!
As with all my files, these are for personal use only. If you would like to purchase a commercial use license, click here.
Download the FREE SVG cut file by clicking here (use with Cricut Design Space)
If you need help on how to upload the file to CDS, click here. (watch video at top and make sure to turn on the sound!) Once you have it in Cricut Design Space, you can ungroup it and take out some of the words if you don’t want them.
Make sure to mirror your image (on the preview page) and place your iron on shiny side down. For a full video tutorial on how I cut and weed out my HTV click here. Here is my brown HTV after I weeded all the extra off.
I preheated my heat press to 305F. Press the burlap for 15 seconds to make sure it’s flat and to get out any moisture.
My piece of burlap was longer than my heat press, so I had to press it in sections. I lined up my HTV in the middle of the burlap and pressed the top half first.
Then I turned it sideways, and pressed the bottom half for 20 seconds.
Then pull off the plastic. Siser easyweed is great because you can pull it off when it’s hot or cold.
Then just place the extra images where you want them. Put a teflon sheet or wax paper over all of the vinyl and press for another 15 seconds or so.
If yours is large like mine, you will have to press it in two sections. If you are using an iron, you could probably do it all at once.
Once it’s all adhered, you just need to attach it to your wood. I just used my tape gun and pressed down the burlap with my hand.
All done! Put it up or make one as a gift!
If you’d like to make another super easy fall decoration, click here to learn how to easily make a fall votive with items from the Dollar Tree!
I have made a few other fall Cricut projects that also have FREE Cricut cut files! Click here to grab the “Happy Fall Y’all” cut file and find out how to make this DIY fall wreath.
Of if you prefer pumpkin decor, click here to find out how to make your own wood pumpkin sign with free SVG cut file.
Are you as excited about Fall as I am??!! Thanks for stopping by and happy crafting!