Skip to Content

Cricut Back to School Projects: Personalize a Teacher Gift and Shirt!

This is a sponsored post written by me on behalf of Cricut. All opinions are 100% mine.

Easily make a personalized back to school shirt and teacher gifts with a Cricut Explore Air 2 whether your child will be in person or distance learning!

The start of this school year is anything but normal, but one thing stays the same… using my Cricut to personalize whatever I can!

My kids are starting the school year with distance learning but that doesn’t mean they can’t wear a cute first day of school shirt for pictures and for their zoom meetings.

We also had a back to school parade where we got to pick up my youngest’s school supplies so giving his new teacher a little personalized gift made her smile. Which is always a good thing during these crazy times.

In the past when we have gone back to school I have used my Cricut to personalize lunch boxes and water bottles, make cute clipboards for teachers, a personalized teacher’s first aid kit, custom backpacks, and so much more (see pictures at the end!).

Having a Cricut means I can personalize pretty much anything I want without spending much money!

zooming into th grade shirt

So today I thought I’d show you how I made this cute Zooming into 4th grade shirt and a few cute Cricut teacher gift ideas including a little personalized zipper pouch using Cricut Infusible Ink. The zipper pouch would also be perfect to give with a cute Infusible Ink mug made with the Cricut mug press.

I do have a full post all about Infusible Ink if you want to know more about it. Also, make sure to visit Cricut.com to learn more about all their amazing products.

Materials Needed for Back to School Projects

Disclosure: This post contains affiliate links from Shareasale, Cricut, Awin, CreativeFabrica, and Amazon.com. I receive a small commission at no cost to you when you make a purchase using my links (purple text). As an Amazon Associate, I earn from qualifying purchases.

infusible ink cosmetic bag

Designing in Design Space

The first thing you’ll need to do is design something in Cricut Design Space. If you are new and need help with CDS, make sure to check out my Cricut Design Space basics.

For the first day of 4th grade shirt, I found an image of a computer screen in Cricut Access and inserted onto my canvas.

computer cricut access

It had two lines in it which I didn’t want, so after I inserted onto my canvas, I clicked on it and then clicked the Contour tool (lower right-hand corner). The following screen will pop up.

contour cricut

Click on the two lines on the panel and you will notice the box they are in turns light grey. That means they are hidden! Super easy to remove!

contour cricut design

X out of the box and you will have a full computer screen image!

Then I found a font I liked and typed out “Zooming into 4th grade” in separate text boxes and aligned them how I wanted them. Then I selected all the words and welded them together. (You can not slice multiple words unless they are welded).

zooming shirt

Then align the words to the center of your computer screen image.

back to school cricut shirt

Then I selected both the computer screen and the text and clicked on slice. Delete the sliced out image and text and you are left with just the computer screen with the words cut out.

slice words cricut
after slice cricut

I used the slice function to also slice out Morales of the rainbow I found in Cricut Access.

With Infusible Ink you’ll need to select the mirror setting to cut it out. Make sure the toggle switch is on and the green is showing.

mirror setting on

I always turn the wheel on my Cricut Explore Air 2 to custom so I can use the setting menu in Cricut Design Space. Select Infusible Ink Transfer Sheet.

infusible ink setting explore

Cutting and Applying Infusible Ink Transfer Sheets

infusible ink shirt

Lay the transfer sheet on a mat with the ink side up. I like to use a brayer to make sure it’s nice and flat.

infusible ink sheet

Load it into your Cricut when prompted by CDS and let it cut. (This is from the watercolor rainbow pack)

cutting infusible ink sheet
infusible ink cut

Once it’s finished cutting, unload the mat and peel off the transfer sheet. Trim around the edges of the image so you can save the rest of the sheet!

Crack the sheet my folding it in your hands. Then start taking out all the extra pieces with your fingers trying not to scratch the ink!

cracking transfer sheet
weeding infusible ink

Do this with all of your transfer sheets if you are using more than one.

Layering Infusible Ink??

You should never layer Infusible Ink! The colors will not come out how you want them.

You also don’t want to press the transfer sheets much more than once because some of the vibrancy can dissipate. So, you’ll need to peel off the smaller piece and stick it on where it will go.

I used two different color transfer sheets for the rainbow and sun. After they cut, I peeled off the excess of both. Then peeled the sun off the backing. The middle of the letters will stay stuck on the backing, so don’t lose it!

combining infusible ink

Then I stuck it on the backing of the rainbow. There wasn’t enough plastic backing to cover it all so I stuck the backing I just peeled off to cover the rest of the sun. So you’ll notice two different sizes.

two colors of infusible ink

Then I picked up the middle of the R with my fingers and stuck it in place.

layering infusible ink

Now it’s ready to infuse!

Applying Infusible Ink

Prep the shirt by placing a white piece of cardstock in side and laying it on an EasyPress mat. Lint roll to make sure nothing will get in the way of the infusing magic!

infusible ink shirt

I always look on the Cricut heat guide to see what to put my temperatures at and how to layer everything. For the shirt, I preheated my EasyPress 2 to 385F and set to 40 seconds.

Once it was preheated, I laid a piece of butcher paper on the shirt and pressed it for 15 seconds.

easy press infusible ink shirt

Then I centered the design and taped it down with heat resistant tape (this is optional) because I want to make sure it doesn’t move.

zooming into th grade

Then I put a piece of butcher paper on and pressed for 40 seconds. Lift the EasyPress off gently.

pressing infusible ink

Then remove the transfer sheet and check out the vibrant shirt!

infusible ink shirt
back to school shirt

My son is Zooming into 4th grade now!

cricut back to school ideas

For the Cricut teacher gift, I went through the same steps except the heat guide setting told me to press for 60 seconds.

Make sure your mat is on a flat surface and that the image is not too close to the zipper so that you get an even press.

Place cardstock in the cosmetic bag, lint roll it, and then place a piece of butcher paper on it and preheat it for 15 seconds.

prepping infusible ink bag

Remove the butcher paper, center your design so the ink is facing the cosmetic bag and tape in place. Place butcher paper over image and press it for 60 seconds.

two colors infusible ink
cricut easy press infusible ink

Then remove the transfer sheets!

peeling infusible ink
teacher cosmetic bag cricut

Add a few goodies (chocolates, Sharpies, gift cards, alcohol!) inside the bag if you want and give it to your teacher!

cricut back to school ideas

More Cricut Teacher Gift Ideas

These are a few Cricut teacher gifts I made a few years ago before I was craft blogging, so the images are not great, sorry!

A cute teacher pencil vase is cheap and easy.  All you need is an inexpensive vase (I got mine from Dollar Store), pencils, and hot glue.  

Just hot glue all the pencils onto the glass vase.  Then I put a ribbon around and used my Cricut Explore Air to cut out the Thank you phrase out of cardstock and hot glued that on top of the ribbon.  

That’s it!  Add some flowers and you’re done!  

teacher appreciation gift

Another one I made for all 20 teachers at our school is a personalized clipboard.  I had emailed all the teachers asking them a few simple questions, like favorite color, hobby, flower, etc.  

I then tried to find some cardstock that went with one of their themes, usually colors.  I wanted to do two different colors so I made 2-inch strips for the bottom and then found a cute piece of cardstock for the top portion.  

I cut out all the names with my Cricut out of cardstock.

  • First glue down the top piece and bottom strip with glue – I used a glue stick but you can also use mod podge. Make sure you get the whole paper covered so bubbles don’t form underneath.  Glue names on the bottom strip.  Let it dry for about a day.
  • Then mod podge over the whole thing.  I kept the top clip open with a zip tie to get underneath it.  Try to smooth out bubbles as you go.  Let it completely dry.
  • You can add some ribbon or embellishments to the top.  I added a little puzzle piece with a note about being an important piece of our puzzle since that was what our theme was that week.
DIYclipboard

Here’s one I made for my daughter.

personalized clipboard

Another fun first day of school teacher gift is a teacher’s survival kit.

I got a small plastic box at Joann’s (with a 40% off coupon!) and cut out adhesive vinyl with my Cricut.  

I filled the container with paper clips, pens, chocolates!, glue sticks, alcohol pads, band-aids, tacks, erasers, and highlighters.  

teacher gifts

Then I made a cute card and added it with twine to the front.  My kids hand it to their teachers when they walk into school the first day!  Win win for the teacher and my kiddo!

teacher survival kit diy

Check out some fun Cricut teacher appreciation gift cards and a wood teacher pencil sign I made for even more ideas.

I hope that gives you some inspiration for back to school projects and teacher gift ideas you can make with your Cricut! There really are endless possibilities of personalizing anything, sometimes it’s hard to know where to start, right??!!

If you’d like to save this post for later, simply hover over the image below and PIN It now!

teacher gift cricut

Thanks for stopping by and have a creative day!

partysignature

LeapofFaithCrafting.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.